Used 40 amp solar charge controller

Model # used-scc40mppt
Used 40 amp solar charge controller
Regular Price: $474.00
Sale Price:$284.40Savings of 40.00%
Out of Stock!
This product is not new, it is used. These items are discounted upto 30% off. This product is fully tested and functioning properly. These units are backed by a 1 year full replacement warranty. If you have any questions about this used product or any other of our used items, please email us Integrates Maximum Power Point Tracking (MPPT), battery charge management, state of charge information. Continuous output Power Rating without derating at up to 50 deg C; ambient temperature. Built-in Battery Energy Monitor tracks power production and consumption in order to calculate the energy remaining in the battery bank. State of charge (SOC) is displayed in percentage of full capacity, Amp-hours, Watt-hours, and 90 days of energy-harvest history and is stored in the solar charger. Supports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (AGM) batteries; 2/3/4-stage charging with adjustable set points for all parameters. Wire the PV modules in series up to 192VDC normal (240VDC Max) for SCC40MPPT Series, SCC80MPPT Series. Easy stacking of up to 16 units in parallel for high currents. Precision charging of 12V/ 24V/36V/48V batteries with easy set-up. Use of battery voltage sense (BVS) wires is required. Built-in temperature compensation function for safe and complete charging.
Maximum output current(Continuous at up 5o deg C ambient temperature): 40 amps Battery Voltages: 12, 24, 36, 48 VDC Normal Max PV Input Current: 30 Amps Max Input Voltage: 192VDC Operating, 240VDC Maximum Open Circuit Voltage Max PV Array Power: 2600 Watts (Maximum when equalizing a 48V battery to 64V at 40 Amps) Charge Regulation Modes: Bulk, Absorption, Float, Auto/ Manual Equalization Battery Temperature Compensation: 5.0 mV per C deg, per 2 volt cell DC to DC Conversion Capability: 12V Battery: 16~192VDC 24V Battery: 32~192VDC 36V Battery: 48~192VDC 48V Battery: 64~192VDC Display Status: Built-in 2-line, 20-character LCD with backlight LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC Data Logging: Logs energy harvested for 90 days, LCD displays WH, KWH, AH Energy Monitor: LCD shows SOC, AH, WH, and present charge or discharge current. A 50mV/ 500Amp shunt is required. Auxiliary Relays: Two independent relays A (SPST) for control of external devices. Contact rating is 3 Amps, 50VDC Operation Temperature: Full Power Output to +50 deg C ambient Standby Power: < 2 Watts Dimension: 10.54 x 7.71 x 5.79 inches Weight: 10 lbs
Recently Viewed Items