This product is not new, it is used. These items are discounted upto 30% off. This product is fully tested and functioning properly. These units are backed by a 1 year full replacement warranty. If you have any questions about this used product or any other of our used items, please email us email@example.com
Integrates Maximum Power Point Tracking (MPPT), battery charge management, state of charge information.
Continuous output Power Rating without de-rating at up to 50 deg C ambient temperature.
Built-in Battery Energy Monitor tracks power production and consumption in order to calculate the energy remaining in the battery bank. State of charge (SOC) is displayed in percentage of full capacity, Amp-hours, Watt-hours, and 90 days of energy-harvest history and is stored in the solar charger.
Supports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (AGM) batteries; 2/3/4-stage charging with adjustable set points for all parameters.
Wire the PV modules in series up to 192VDC normal (240VDC Max) SCC80MPPT Series.
Easy stacking of up to 16 units in parallel for high currents.
Precision charging of 12V/ 24V/36V/48V batteries with easy set-up. Use of battery voltage sense (BVS) wires is required.
Built-in temperature compensation function for safe and complete charging.
Maximum output current(Continuous at up 50 deg C ambient temperature): 80 amps
Battery Voltages: 12, 24, 36, 48 VDC Normal
Max PV Input Current: 70 Amps
Max Input Voltage: 192VDC Operating, 240VDC Maximum Open Circuit Voltage
Max PV Array Power: 5200 Watts (Maximum when equalizing a 48V battery to 64V at 80 Amps)
Charge Regulation Modes: Bulk, Absorption, Float, Auto/ Manual Equalization
Battery Temperature Compensation: 5.0 mV per?, per 2 volt cell
DC to DC Conversion Capability:
12V Battery: 16~192VDC
24V Battery: 32~192VDC
36V Battery: 48~192VDC
48V Battery: 64~192VDC
Display Status: Built-in 2-line, 20-character LCD with backlight LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC
Data Logging: Logs energy harvested for 90 days, LCD displays WH, KWH, AH
Energy Monitor: LCD shows SOC, AH, WH, and present charge or discharge current. A 50mV/ 500Amp shunt is required.
Auxiliary Relays: Two independent relays A (SPST) for control of external devices. Contact rating is 3 Amps, 50VDC
Operation Temperature: Full Power Output to +50 deg C ambient
Standby Power: < 4 Watts
Dimension: 16.33 x 8.86 x 5.79 inches
Weight: 16 lbs